Installing a Polycom
Group 700 System in the Polycom
RealPresence
This supplement describes how to install a Polycom
®
RealPresence
Group Series Media Center. Follow the instructions in Setting Up the Polycom RealPresence Group
Series Media Center, 1725-08510-00X, and use this supplement to replace the steps to install the system.
Remove the four screws from both sides of the
19a
Group 700 system.
For more information about the components of the RealPresence Group Series Media Center,
refer to the documentation at
http://support.polycom.com/PolycomService/support/us/support/video/group_series/group_packaged_solutions.html.
© 2014, Polycom, Inc. All rights reserved. POLYCOM® and the names and marks associated with Polycom's products are trademarks and/or service marks of
Polycom, Inc. and are registered and/or common law marks in the United States and various other countries. No portion hereof may be reproduced
or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Polycom.
®
RealPresence
®
Group Series Media Center
®
RealPresence
19b
19c
www.polycom.com
1725-09099-001/A
®
®
®
Group 700 system in the Polycom
Position the Group 700 system in the tray.
Attach the Group 700 system to the tray using
three of the four screws, removed in step 19a,
on each side of the Group 700 system.
®
1
Need help?
Do you have a question about the RealPresence Group 700 System and is the answer not in the manual?
Questions and answers