Power On The Realpresence Group System; Power On Self Test (Post); View Post Warnings; Wake A Realpresence Group System - Polycom RealPresence Group 300 User Manual

Power On the RealPresence Group System

After charging your remote control or attaching accessories, you need to power on the RealPresence Group
Series system.
To power on the RealPresence Group system:
» On RealPresence Group 300, 310, 500, and 700 systems, touch and hold the
the front of the system.
Because the power sensor is touch sensitive, you can place your finger on or close to the sensor. The
Polycom splash screen displays within several seconds.

Power On Self Test (POST)

After being powered on, RealPresence Group 300, 310, 500, and 700 systems automatically perform
system health checks before the systems are initialized.
This process is known as a power on self test, or POST. The status of the POST sequence is displayed with
the LED indicator light on the front of the device, or for the RealPresence Group 700 system, in the text field
display on the front of the system.
All test results are logged in the system memory. For more information about what the colors of the indicator
lights mean, contact your administrator.
When the POST sequence completes with no severe errors, the RealPresence Group system starts
normally.

View POST Warnings

If any warnings occur during the POST, use the remote control to view them after the system starts.
» Go to > System Information > Status > Active Alerts.
For more details, use the remote control to select More Information. If a severe error occurs during
startup, the system does not power on. Contact Polycom technical support.

Wake a RealPresence Group System

After a certain amount of time with no activity, the RealPresence Group system goes into sleep mode.
» Press any button on the remote control, or just pick up the remote to wake up the system.

Power Off a RealPresence Group System

If you need to change out certain connected peripherals, you might need to power off the RealPresence
Group system.
To power off RealPresence Group 300, 310, 500, and 700 systems:
1 Touch the power sensor on the front of the system.
The indicator light changes color and blinks, which means that the system is shutting down.
2 Release the power sensor when the indicator light changes color.
Polycom, Inc.
power sensor on
4