Table of Contents
Advertisement
NAS OS Setup
Once your Seagate NAS has been configured per the instructions of the included quick start guide, the NAS OS
Setup Wizard will guide you through the remainder of the installation. The NAS's administrator must complete
the setup wizard since a password will be created to access the NAS OS management features. The time to
complete the setup wizard varies based upon your NAS. Choose the option below that matches your Seagate
:NAS
.Enclosure with disks: If you purchased an enclosure with disks, go to
First Use: Enclosures with Disks
Enclosure without disks: If you purchased an enclosure that did not include disks, go to
First Use: Empty
.Enclosure
First use: Enclosure with disks
Before connecting to NAS OS, configure the Seagate NAS on your network. For instructions, review your NAS's
.user manual and quick start guide
Enclosure without disks: If you purchased an empty enclosure, go to
First use: Empty enclosure
for
.instructions on how to set up Seagate NAS OS
:Consider the following before installing Seagate NAS OS
.The NAS OS device's administrator should complete the installation steps
NAS OS checks for software updates during the installation. An error message informs you if it cannot check
for updates due to a missing Internet connection. You have the option to search for updates after the
.installation
.Power on the device. The device is ready to be accessed once the status LED turns solid .1
From a PC/Mac connected to the same network as your NAS, launch an Internet browser and type .2
http://discover.seagate.com
.Follow the on-screen instructions .3
27
10/18/16
Seagate NAS OS 4
Advertisement
Table of Contents
