Table of Contents
Advertisement
Enclosure with disks: If you purchased an enclosure with disks, go to
Seagate NAS are compatible with most SATA I, SATA II, and SATA III hard drives. Older hard drives that are not
constructed for NAS can experience reduced performance or failure. If you have any questions regarding hard
Seagate hard drives are specially prepared for use with your Seagate NAS. Choose the link below to view hard
Important info: The Seagate NAS OS installer must format the hard drives inserted into the NAS.
Data stored on the hard drives will be deleted. Make certain to back up data on the hard drives
Make certain to boot the NAS before inserting new hard drives. Since the boot order for the NAS starts
with the hard drives, you can encounter a problem if it detects an earlier version of NAS OS or another
.Insert the hard drives once the diskless enclosure is powered on and the status LED is blinking
The NAS checks for software updates during the installation. An error message informs you if it cannot
check for updates due to a missing connection to the Internet. You have the option to search for updates
The instructions for hardware installation are available on the quick start guide and user manual for your
.Seagate NAS. Make certain to follow the instructions before continuing with the steps below
29
.Disks
for instructions on how to set up Seagate NAS OS
Choose compatible hard drives
.drive compatibility, contact
.before installing them in the Seagate NAS enclosure
:Consider the following before installing Seagate NAS OS
.The NAS OS device's administrator should complete the installation steps
10/18/16
First Use: Enclosures with
Seagate customer support
:drives that are optimized for your Seagate NAS
Seagate 8-bay Rackmount NAS
Seagate 4-bay Rackmount NAS
Install Seagate NAS OS
Seagate NAS Pro
Seagate NAS
.operating system
.after the installation
Seagate NAS OS 4
Advertisement
Table of Contents
