Seagate NAS OS 4 U User Manual page 114

Choose No encryption to move to the summary page or, Encrypt the volume. When choosing encryption, you .6
have two options to unlock the volume: password only or, a password plus a USB device. Enter the password
Review the summary window and then choose Finish. A popup window cautions you that all data on the .7
.selected hard drive will be deleted to create the volume. Select Yes to build the SimplyRAID volume
Important : A volume with only one hard drive cannot protect data. Consider adding new hard
You can create multiple volumes on one NAS OS device. While this manual cannot list every option for multiple
This example demonstrates the creation of two volumes using RAID 5 (performance and protection) and
NAS OS detects new hard drives in the enclosure. Choose Manage to launch the New network volume .2
In the Select disks window, hard drives with white checkboxes can be selected for a new volume. Hard .3
drives with grey checkboxes are being used by volumes and cannot be selected. Select the boxes under
the hard drives for the new volume and choose Next. Important: All data on the hard drives that you select
Choose No encryption to move to the summary page or, Encrypt the volume. When choosing encryption, you .6
have two options to unlock the volume: password only or, a password plus a USB device. Enter the password
Review the summary window then choose Finish. A popup window cautions you that all data on the .7
.NAS OS detects new hard drives in the enclosure. Choose Manage to launch the New network volume wizard .2
In the Select disks window, hard drives with white checkboxes can be selected for a new volume. Hard .3
drives with grey checkboxes are being used by volumes and cannot be selected. Select the boxes under
the hard drives for the new volume and choose Next. Important: All data on the hard drives that you select
114
.and/or insert a USB device into one of the NAS's USB ports. Choose Next
.To expand a single-disk volume, see
.Select your preferred level of RAID and choose Next. In this example, it is RAID 5 .5
.and/or insert a USB device into one of the NAS's USB ports.Choose Next
.selected hard drives will be deleted. Choose Yes to build the volume
10/18/16
.Select JBOD or RAID 1 and then choose Next .5
.drives as soon as possible
Single-disk and unprotected volumes: expansion
.volumes, you can use the steps below as a guide
( : Create the first volume (RAID 5
.Go to Storage > Storage Overview .1
.is deleted to create the RAID volume
.Select Custom and then choose Next .4
( : Create the second volume (SimplyRAID
.Go to Storage > Storage Overview .1
.is deleted to create the RAID volume

Multiple volumes
( . SimplyRAID (protection
.wizard
Seagate NAS OS 4