Seagate NAS OS 4 U User Manual page 48

Table of Contents

:For most users, the first NAS OS login is the final step of the setup wizard. You are prompted to

Create a device name. The default name of your NAS is based upon the product model. You can change it to

.meet the needs of your environment

Create an administrator login name. The default is admin but you have the option to change it. A login name

.should be from 1-20 alphanumeric characters

Create and confirm the administrator's password. The password should be from 4-20 alphanumeric

.characters and symbols. Consider using a strong password that is difficult for others to guess

.Create or reconfigure the RAID level

.Set the time zone

.Read and agree to Seagate's Terms and Conditions. The box must be checked to complete the installation

Important info on login credentials: Make certain to note your login credentials. NAS OS can help



users create a new password if the original password is not available. However, the option to

recover a password requires that the administrator add settings to

Notifications

and Users.

.Further information on how to set up password recovery is listed below

10/18/16

Seagate NAS OS 4

Table of Contents