Seagate NAS OS 4 U User Manual page 78

The Connections table lists the general network settings for the LAN ports. The number of LAN ports depends
.Star icon: The star appears on the primary LAN. See the note below regarding the primary LAN
Name: The default names for the LAN ports are LAN 1, LAN 2, etc. Click on the name to enter a new name
IP address: This column shows the NAS's IPv4 addresses. If your network is DHCP-enabled for IPv4, the
IPv6 address: This column shows the NAS's IPv6 addresses. If IPv6 is turned on and your network is DHCP-
Status: A green circle means that the LAN port is connected to an active network. A white circle shows
Icons representing the LAN ports sit below the Connections table. An icon will become highlighted when the
To review or modify settings for a LAN port, pass the cursor to the far right of its row to make the Edit pull-down
menu visible. Available settings in the pull-down menu differ based upon the NAS's LAN connections.
Specifically, Define as primary will only appear if the NAS has more than one LAN connection
IPv4 tab: The default IP configuration setting for the LAN port is Automatic (DHCP). To use a static IP, click on
the pull-down menu and choose Manual. For the static IP address to take effect, all fields (including Default
gateway and DNS server) must be completed before choosing Save. Check the box next to Default gateway
.to enter or revise the gateway address. The LAN port will revert to automatic if a field is left blank
78
.Type: The type of cable attached to the LAN port
.LAN ports are automatically assigned IPv4 addresses
.enabled, the LAN ports are automatically assigned IPv6 addresses
:cursor is passed over the port's row. The icons also indicate the following
.Connected Ethernet end: The port is connected to a network
.Disconnected Ethernet end: The port is not connected to a network
.Choose Edit to review and update important settings on the LAN port
.Name: Type a new name in the LAN port's Name field
10/18/16
.upon your NAS model
.for the LAN port
.there is no connection to a network
.Speed: The speed of the network
LAN Edit menu
LAN Edit menu: Edit
Seagate NAS OS 4