Snmp Tab - Seagate NAS OS 4 U User Manual

Administrators with advanced networks that include SNMP can add the NAS OS device as an agent. NAS OS
Turn on the SNMP agent by clicking on its slider. To make changes to the SNMP configuration, pass the cursor
The information below identifies and explains the functions on the Storage page. For directions on how to
NAS OS supports multiple volumes, each with its own level of RAID. The maximum number of supported
volumes depends upon the amount of disks in the NAS's enclosure. For example, a NAS OS device with eight
No matter the capacity of your hard drives, NAS OS SimplyRAID will prepare the storage for immediate use as
When using hard drives of varying capacities, SimplyRAID will attempt to optimize available storage for your
While the benefits of SimplyRAID are highly recommended, the Storage page also gives you the option to
96
.supports SNMP versions v1/v2 and, for enhanced security, v3
NAS OS volume and RAID management
Enhanced data protection: NAS OS SimplyRAID
Replace smaller capacity hard drives with larger capacity hard drives
Upgrade storage capacity without deleting or moving data
Standard disk con guration: Manual RAID
(RAID 1 (minimum two hard drives for data protection
10/18/16
.To purge all events from the log list, choose Clear logs
.configure RAID for your NAS OS device, go to
.hard drives can have up to eight volumes
:well as future expansion. SimplyRAID allows you to
Install disks of varying capacities
Protect data without compromising performance
:manually configure your hard disks as
(RAID 0 (minimum two hard drives
(RAID 1+Spare (minimum three hard drives
(RAID 5 (minimum three hard drives

SNMP tab

.over a setting and click on it
Storage
RAID
.data
JBOD
Seagate NAS OS 4