Macintosh Os X Installation - Seagate FreeAgent Pro Quick Start Manual

Macintosh OS X Installation

If you need further information
about any step, please refer to the
User Guide located on the hard
drive. If you choose to sit and stare
at your new FreeAgent Pro for a
while, that's okay, too.
Step 1.
Take your FreeAgent Pro and cables
out of the box and plug in the
power adapter.
4
Step 2.
Connect the USB 2.0 or FireWire 400
®
(on select models) cable from the
FreeAgent Pro to the corresponding
port on your computer. Wait about
two minutes for your computer to
recognize your FreeAgent drive.
Step 3.
Note: It is highly recommended that you copy
the current contents of the FreeAgent Pro to
your computer before proceeding.
Browse to and double-click the Mac
Installer file located on the drive.
Follow the on-screen prompts to
copy the Installer to your Macintosh
Desktop, prepare the drive with
an HFS+ partition, and install
the software.
Step 4.
After you've installed the FreeAgent
Tools and Memeo LifeAgent
software and have restarted your
computer, the Memeo LifeAgent
registration window will open. Enter
your product key (located in the
Quick Start Guide table of contents).
Once the key is entered, you will
have full functionality of Memeo
LifeAgent.
Follow the on-screen instructions
to configure your backup and your
installation is complete.
Your FreeAgent Pro is now ready
to access, share, and back up
your content.
A note or two about
disconnecting.
To prevent data loss, click the
FreeAgent Pro icon and drag it
to the Trash. Then disconnect the
power cord and interface cable.
5