YASKAWA 1000 Series Installation Manual page 34

8 Troubleshooting
Digital Operator Display
oFA00
Cause
Non-compatible option
connected to drive port CN5-A
Digital Operator Display
oFA01
Cause
Problem with the connector
between the drive and option.
Digital Operator Display
to
oFA30 to
oFA43
Cause
Option hardware fault.
Digital Operator Display
oFb00
Cause
Non-compatible option
connected to drive port CN5-B.
Digital Operator Display
oFb02
Cause
Options AI-A3 or D1-A3
connected to the CN5-B port
while an option was connected
to CN5-A.
Digital Operator Display
oFC00
Cause
Non-compatible option
connected to drive port CN5-C.
34
Non-Compatible Option connected to drive port CN5-A
Option is not properly connected.
Use only compatible options. Connect the SI-P3 to CN5-A. For other option
connections, refer to the Installation Manual for those options.
Option Fault (CN5-A)
Option is not properly connected.
Turn the power off and check the connectors between the drive and option.
Option Fault (CN5-A)
Communication ID error.
Replace the option. Contact Yaskawa for assistance.
Non-Compatible Option connected to drive port CN5-B
Non-compatible option is connected.
Use only compatible options. Connect the SI-P3 to CN5-A. For other option
connections, refer to the Installation Manual for those options.
Option Fault (CN5-B)
Two of the same option are connected simultaneously.
Only one of these options, AI-A3, DI-A3 or SI- option can be connected to the
drive at the same time. The SI-N3 must be connected to CN5-A.
Non-Compatible Option connected to drive port CN5-C
Non-compatible option is connected.
Use only compatible options. Connect the SI-P3 to CN5-A. For other option
connections, refer to the Installation Manual for those options.
YASKAWA ELECTRIC TOBP C730600 42D 1000-Series Option SI-P3 Installation Manual
Fault Name
Possible Solution
Fault Name
Possible Solution
Fault Name
Possible Solution
Fault Name
Possible Solution
Fault Name
Possible Solution
Fault Name
Possible Solution