YASKAWA 1000 Series Installation Manual page 19

2.
With the front covers and digital operator removed, apply the LED label (E) in the
appropriate position on the drive top front cover (C).
Figure 4
3.
Insert the option card (B) into the CN5-A connector (K) located on the drive and
fasten it using one of the included screws (H).
Figure 5
K
YASKAWA ELECTRIC TOBP C730600 42D 1000-Series Option SI-P3 Installation Manual
Figure 4 Apply the LED Label
H
Figure 5 Insert the Option Card
5 Installation Procedure
C
ERR RUN
BF COMM
B
E
19