4
Configuring The Meter
4.12 USING LOCK OUT CONFIGURATION
Note
Use Lock Out Configuration LK.CF for the following:
4.12.1 Enabling or Disabling the RESET button in the Run Mode
Press the MENU button until the meter shows LK.CF (after OT.S.O ).
1.
Press the ∂TARE button. The meter shows one of the following:
2.
Press the ßNT/GRS button to toggle between available choices.
4.
Press the MENU button to store the changes. The meter shows STRD if the new
5.
value is different otherwise the meter shows BRIT and returns to the Run Mode.
4.12.2 Enabling or Disabling SETPOINT Changes
Press the MENU button until the meter shows LK.CF (after OT.S.O ).
1.
Press the ∂TARE button twice. The meter shows one of the following:
2.
Press the ßNT/GRS button to toggle between available choices.
3.
Press the MENU button to store the changes. The meter shows STRD if the new
4.
value is different otherwise the meter shows BRIT and returns to the Run Mode.
42
Refer to Table 6-1 for a summary list of menu configuration.
•
To enable or disable setpoint changes
•
To enable or disable the RESET button in the Run Mode
•
To enable or diable displaying meter firmware version
RS.=E To enable the RESET button in the Run Mode (Default)
•
RS.=D To disable the RESET button in the Run Mode
•
SP.=E To enable setpoint changes (Default)
•
SP.=D To disable setpoint changes
•
LK.CF