Run Mode Displays - Omega DP25B-S User Manual

6
Menu Configuration Displays
SECTION 6. MENU CONFIGURATION DISPLAYS (Continued)
Table 6-1. Menu Configuration Displays (Continued)
MENU
Lock Out Configuration
LK.CF
Brightness Configuration
BRIT
Display
NET / GROS
T.RST
SP.RS
48
(Defaults in Bold and Italics)
∂TARE
RS=E (Enable RESET button in the Run Mode)
RS=
RS=D (Disable RESET button in the Run Mode)
SP=E (Enable setpoint changes)
SP=
SP=D (Disable setpoint changes)
L3=0 ( SETPTS button display setpoint values )
L3=
L3=1 ( SETPTS button display firmware version
where 8 is 0 ~ 9 )
M.BrT ( Medium Brightness )
Shows
input
L.BrT (Low Brightness)
choices
H.BrT (High Brightness)
Table 6-2. Run Mode Displays
∂ ∂ TARE
ßNT/GRS
Displays NET
or GROSS
reading. Once
reading shows,
respective value
shows.
Press to
activate.
ßNT/GRS
RESET Description
Peak Reading
Toggle between
Net and Gross
values.
Will reset your Tare Reset
tare when
viewing this
function.
Reset Latched
Alarms
Pressing the
RESET button
resets your
latched alarms.
V.-8.8