Table of Contents
Advertisement
Manual Objectives
This manual shows you how to set up and use the Programmable Digital Meter.
Standard Procedures:
*
Checking voltage jumpers, or changing voltage power
*
Mounting the panel
*
Selecting the input type
*
Selecting a decimal point position
*
Scaling with known loads (on-line calibration)
*
Scaling without known loads
*
Selecting ratiometric/non-ratiometric operation
*
Displaying the filtered/unfiltered input signal
*
Selecting a display color
*
Setting the setpoint's active band
*
Selecting a latched or unlatched operation
*
Setting setpoint deadbands
*
Enabling/disabling setpoint changes
*
Enabling/disabling the RESET button in the Run Mode
Optional Procedures:
*
Setting input resolution
*
Enabling/disabling analog output
*
Selecting analog output as current or voltage
*
Assigning the output to net/gross reading
*
Scaling analog output
Features with
"Big" LED display - All segment characters shown are for the "B" version.
For first-time users: Refer to the QuickStart Manual for basic operation and set-
up instructions.
PREFACE
are for the "B" version which has three-color programmable
i
Hide quick links:
Advertisement
Table of Contents
