Sec - Omega DP25B-S User Manual

6
Menu Configuration Displays
SECTION 6. MENU CONFIGURATION DISPLAYS (Continued)
Reading Configuration
RD.CF
Display Color Selection
COLR
Setpoint 1 Configuration
S1.CF
Setpoint 2 Configuration
S2.CF
46
Table 6-1. Menu Configuration Displays (Continued)
(Defaults in Bold and Italics)
MENU
Show input choices:
∂TARE
R.1=R (Ratiometric Reading)
R.1=
R.1=N (Non-ratiometric reading)
R.2=0 (1 µV resolution for unipolar
R.2=
R.2=1 (2 µV resolution for unipolar
R.2=2 (3 µV resolution for unipolar
R.2=3 (5 µV resolution for unipolar
R.2=4 (10 µV resolution for
Note: 3 µV resolution means if
your input is 0-30 mV, at 30 mV
the display shows 9999.
R.3=F (Filtered value)
R.3=
R.3=U (Unfiltered value)
R.4=G (Gross/Net Display)
R.4=
R.4=P (Peak Display)
GRN
RED
AMBR
S.1=A (Active above)
S.1=
S.1=B (Active below)
S.2=U (Unlatched)
S.2=
S.2=L (Latched)
S.3=N (Net Reading)
S.3=
S.3=G (Gross Reading)
S.1=A (Active above)
S.1=
S.1=B (Active below)
S.2=U (Unlatched)
S.2=
S.2=L (Latched)
S.3=N (Net Reading)
S.3=
S.3=G (Gross Reading)
ßNT/GRS
& 5 µV resolution for bipolar)
& 10 µV resolution for bipolar)
& 15 µV resolution for bipolar)
& 25 µV resolution for bipolar)
unipolar & 25 µV resolution
for bipolar)
( Green )
( Red )
( Amber )