Timing I/O Interface - Hamamatsu Photonics C8484-16C Instruction Manual

C8484-16C Instruction manual Ver.1.5
(2) CameraLink bit assignments
28 bit Solution
Pin Name
TX0
TX1
TX2
TX3
TX4
TX5
TX6
TX7
TX8
TX9
TX10
TX11
TX12
TX13
 DVAL (Data valid signal)
This signal synchronizes in the image data from CCD, and it is outputted. Each digital data is
effective with the period of "On" of the signal.
 LVAL (Line valid signal)
This signal shows the period during which the line part of the image data from the CCD is in
effect. This is "ON" when during the period the line is active.
 FVAL (Frame valid signal)
This signal shows the period during which the vertical part of the image data from the CCD is in
effect. This is "ON" during the period the frame is active.
 DB0 to DB11 (Digital image data)
This is the image signal data from the CCD converted A/D. DB0 is the LSB (least significant bit)
and DB11 is the MSB (most significant bit).

14-3-2 TIMING I/O INTERFACE

(1) Timing I/O pin assignments [TIMING I/O]
The camera uses Hirose model HR10A-7R-6S connector for inputting the external
trigger pulse when the camera is operated in External Control mode. Input is TTL level
(termination is 680 Ω), and the external trigger pulse polarity can be set either to
negative or positive.
46
Input Signal Name
DB0
DB1
DB2
DB3
DB4
DB7
DB5
DB8
DB9
DB10
NC
NC
DB11
NC
No. Signal
1 Ext.Trigger
2 Digital GND
3 NC
4 Digital GND
5 NC
6 Digital GND
28 bit Solution
Input Signal Name
Pin Name
TX14
TX15
TX16
TX17
TX18
TX19
TX20
TX21
TX22
TX23 Spare
TX24
TX25
TX26 DVAL
TX27
Pin connections
HR10A-7R-6S
NC
NC
NC
NC
NC
NC
NC
NC
NC
LVAL
FVAL
DB6