Hamamatsu Photonics C8484-16C Instruction Manual page 24

C8484-16C Instruction manual Ver.1.5
(3) 4×4 binning readout
Exposure and 44 binning readout repeat according to the sequence set internally.
Command
Scan mode
Exposure time
Binning
1V (vertical)
Setting count
Repeat cycle
Exposure time can be calculated using the formula below.
CCD exposure
Readout signal
from CCD chip
Digital data
output
(4) Sub-array readout
Readout of the sub-array repeats along with frame blanking according to the sequence
set internally with the selection of <SVO n/SVW m/SPX e>. The exposure time
(electronic shutter time) is set with the FBL n command.
Command
Scan mode
Exposure time
Sub-array
CCD exposure
Readout signal
from CCD chip
Digital data
output
22
: AMD N (Free running mode)
: SMD S (Binning)
: NMD F, FBL n (Frame blanking)
: SPX 4 (4×4 binning)
: 28.0 ms
: 1V to 36V (28.0 ms to 1.00 s）
: 35.7 Hz/n
Exposure time = n × 28.0 ms
Exposure time = FBL n
Readout period
: AMD N (Free running mode)
: SMD A (Sub-array)
: NMD F, FBL n (Frame blanking)
: SVO n / SVW m / SPX e
Exposure time = FBL n
Readout period
(n=1 to 36)