Hamamatsu Photonics C8484-16C Instruction Manual page 40

C8484-16C Instruction manual Ver.1.5
(4) Other setting commands
INI
(INItialize)
Parameter
Function
RES
(RESponse)
Parameter
Function
Example
(5) Status commands
Status commands return the current settings values.
Commands
?AMD (read Acquire MoDe)
?NMD (read Normal MoDe)
?EMD
(read External MoDe)
?SMD (read Scan MoDe)
?ADS (read A/D Select)
?SHT
(read SHutter Time)
?FBL (read Frame BLanking)
?EST
(read External Shutter Time)
?SHA (read Scan Horizontal Area)
?ATP (read Acquire Trigger Polarity)
?SPX
(read Super Pixel X)
?SHO (read Scan H-Offset)
?SHW (read Scan H-Width)
?SVO (read Scan V-Offset)
?SVW
(read Scan V-Width)
?ESC (read External trigger Source Connector)
?CEG (read Contrast Enhancement Gain)
?RES
(read RESponse)
The following command is a special status command not in the group of settings
commands.
?VER
(read rom VERsion)
Function
Return value
38
None
Initializes the contents of the camera control unit's internal parameter
RAM.
Y (Yes) / N (No)
Determines whether or not responses are returned when commands
are executed.
Responses are returned when command are executed.
RES Y
Responses are not returned when command are executed.
RES N
Returns the version of the camera's internal ROM.
x.xx
Return value
N/E
N/S/F
E/L
N/S
8/10/12
n ・Normal readout : 1 to 1055
・2×2 binning readout : 1 to 535
・4×4 binning readout : 1 to 269
n ・Normal readout : 1 to 12
・2×2 binning readout : 1 to 22
・4×4 binning readout : 1 to 36
n (1 to 12 930)
F/K/M
N/P
1/2/4
n (0 to 1336)
m (8 to 1344)
n (0 to 1016)
m (8 to 1024)
I/M
L/H
Y/N