Operating Environment - Hamamatsu Photonics C8484-16C Instruction Manual

Connecting and Disconnecting cables
Always turn off the power before connecting and disconnecting cables.
Fixing the camera head
When fitting the camera head to a tripod or other fixture, use the screw
(1/4-20UNC) in the center of a camera mount or the threaded sleeve (M3)
about the mount's perimeter. Be careful not to allow the fitting screw to
enter more than 5 mm from the surface of the mount. Screwing this in
excessively may impair normal operation.
Lenses
Be careful not to screw the lens more than 7 mm onto the C-mount of the
camera head. Doing so can scratch the protective glass. (Some wide-angle
lenses in particular can have a thread of 7 mm or more.)
Shipping precautions
When transporting the camera by truck, ship, airplane, etc., wrap it securely
in packaging material or something similar.
Strong impact
Do not subject the camera to strong shocks by dropping it, for example.
Doing so can damage the camera.

Operating environment

This system is designed and tested for use in an industrial environment. If
this system is used in residential areas, EMI (electro-magnetic interference)
may occur. This system must not be used in residential areas.
Disposal
When disposing of the system, take appropriate measures in compliance
with applicable regulations regarding waste disposal and correctly dispose
of it yourself, or entrust disposal to a licensed industrial waste disposal
company. In any case, be sure to comply with the regulations in your
country, state, region or province to ensure the system is disposed of
legally and correctly.
C8484-16C Instruction manual Ver.1.5
CAUTION
3