Hamamatsu Photonics C8484-16C Instruction Manual page 35

(4) Other Setting Commands
This group contains commands for initializing the camera and for other settings.
INI Sets the various settings that determine the camera's overall operation to
the initial values.
RES
Selects whether responses are made to commands.
(5) Status commands
When the host computer outputs a status command, a response is then returned by the
camera. All status commands are preceded by a question mark ("?"); if the status
command is contained within a setting command, the question mark is added at the
beginning of the command.
?AMD
Returns the setting for the exposure trigger timing.
Returns the setting for the method used to set the exposure time when the
?NMD
exposure trigger timing is controlled internally.
Returns the setting for the method used to set the exposure time when the
?EMD
exposure trigger timing is controlled externally.
?SMD
Returns the setting switching the scan mode.
?ADS
Returns the bit number of digital data output.
Returns the exposure time (sets the electronic shutter speed) when the
?SHT
exposure trigger timing is controlled internally.
Returns the exposure time (sets the frame blanking count) when the
?FBL
exposure trigger timing is controlled internally.
Returns the exposure time when the exposure trigger timing is controlled
?EST
externally (sets the electronic shutter speed when the exposure time is set
internally).
?SHA
Returns the pixel number of digital output horizontal pixel.
?ATP
Returns the external trigger pulse polarity.
?SPX
Returns the setting value when binning is selected as the readout mode.
?SHO
Returns the setting value for the horizontal start address.
?SHW
Returns the setting value for the horizontal line width.
?SVO
Returns the setting value for the vertical start address.
?SVW
Returns the setting value for the vertical line width.
?ESC
Returns the setting input connector for external trigger.
?CEG
Returns the contrast enhancement gain setting value.
?RES
Returns the setting for the command response.
?VER
Returns the version of camera's internal components.
?CAI
Returns information about the camera hardware.
C8484-16C Instruction manual Ver.1.5
33