Timing I/O Connector Pin Assignments [Timing I/O]; Camera Connector Pin Assign Ment [Power] - Hamamatsu Photonics C9300-201 Instruction Manual

14-3-2 TIMING I/O CONNECTOR PIN ASSIGNMENTS [TIMING I/O]

The camera uses HIROSE model HR10A-7R-6S connector for inputting the external trigger
pulse when the camera is operated in external control mode. Input should be TTL level, and the
external trigger pulse polarity can be set either to negative or positive.

14-3-3 CAMERA CONNECTOR PIN ASSIGN MENT [POWER]

The camera employs HIROSE mode HR10A-10R-12PB connectors.
No. Signal
1 Ext.Trigger
2 Digital GND
3 SG output
4 Digital GND
5 NC
6 Digital GND
•
Do not connect anything to pins 5 and 6.
No. Signal
1 GND (Camera)
2 12 V (Camera)
3 NC
4 NC
5 NC
6 NC
7 NC
8 NC
9 NC
10 NC
11 NC
12 NC
HAMAMATSU PHOTONICS K.K.
Pin connections
HR10A-7R-6S
Pin connections
HR10A-10R-12PB
C9300-201 Ver.1.2
43