Specification; Camera Specification - Hamamatsu Photonics C8484-16C Instruction Manual

14. SPECIFICATION

14-1 CAMERA SPECIFICATION

(1) Electrical specification
Imaging device
Effective number of pixels
Cell size
Effective area
Frame rate
Readout noise
A/D converter
Lens mount
Amp gain conversion factor *
Full well capacity
Contrast enhancement gain
Exposure time setting
*
1 This value is the measurement in free running and scan modes normal readout. The value was measured with the
CCD in dark state. In this state, two images are acquired, image subtraction performed, the standard deviation
taken from the results, and this value was then divided by squire root of 2 and plugged into a transformation
coefficient.
*
2 When running an amp-gain transformation coefficient to convert measured image count values into electrons be
sure to conduct dark subtraction first.
(2) Operating environment
Ambient storage temperature
Ambient operation temperature
Ambient operating humidity
Operating space
(3) Dimensional outline and weight
Camera head
Camera control unit
Note
(4) Applicable standards
EMC EN61326-1:2006
Progressive scan inline CCD solid-state imaging device
1344
4.65 µm × 4.65 µm
6.25 mm × 4.76 mm
Normal readout
2×2 binning readout
4×4 binning readout
14 electrons (typ.) *
12 bit
C-mount
2
2.8 electrons/ADcounts
10 900 electrons
0 dB/14 dB
12.4 µs to 1 s
0 ºC to + 40 ºC
-10 ºC to + 50 ºC
70 % or less (no condensation)
Indoor, altitude up to 2000 m
Approx. 160 g
Approx. 610 g
• Please refer to 15 Dimensional outline.
Class A
C8484-16C Instruction manual Ver.1.5
× 1024
(H) (V)
(Square format)
(1/2-inch size)
11.9 Hz
21.3 Hz
35.7 Hz
1
43