Hamamatsu Photonics C8484-16C Instruction Manual page 22

C8484-16C Instruction manual Ver.1.5
(3) 4×4 binning readout
Exposure and 44 binning readout repeat according to the sequence set internally.
Command
Scan mode
Exposure time
Binning
1H (horizontal) :
Setting count
Repeat cycle
Exposure time can be calculated using the formula below.
Exposure time = 36.7 µs + (n-1) × 103.6 µs
CCD exposure
Electrical
shutter signal
Readout signal
from CCD chip
Digital data
output
(4) Sub-array readout
Readout of the sub-array repeats according to the sequence set internally with the
selection of <SVO n/SVW m/SPX e>.
Command
Scan mode
Exposure time
Sub-array
CCD exposure
Electrical
shutter signal
Readout signal
from CCD chip
Digital data
output
20
: AMD N (Free running mode)
: SMD S (Binning)
: NMD S, SHT n (Shutter)
: SPX 4 (4×4 binning)
103.6 µs
: 1H to 269H
: 35.7 Hz
Exposure time = SHT n
Readout period
: AMD N (Free running mode)
: SMD A (Sub-array)
: NMD S, SHT n (Shutter)
: SVO n/SVW m/SPX e
Exposure time = SHT n
(n=1 to 269)
Readout period