Using A Password; Setting/Changing The Password - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Using a Password

All parameter configuration settings for the drive and its connected peripherals
can be protected from unauthorized access using a password.

Setting/Changing the Password

1. Access the Status screen (see
2. If Port 00 (host drive) is not shown above the ESC soft key, use the
or
3. Press the
4. Use the
5. Use the
6. Press the
6WRSSHG
 +]
(QWHU 1HZ 3DVVZRUG
 
(6&
7. Use the numeric keys to enter a desired password value.
soft key to delete an erroneous entry.
Use the
For your convenience, write down your assigned password and store it in a
safe place.
Password = ____ ____ ____ ____ ____
8. Press the ENTER soft key to enter the new password.
9. After the password verification screen appears, confirm the new password
by re-entering its value.
Thereafter, the HIM immediately logs in to the drive, which is indicated
by the Log Out menu line in the PROPERTIES folder. All drive/
peripheral parameters are accessible to view or edit.
10. To initiate password protection, do the following:
a. Use the
folder menu.
b. Press the
box.
c. Press the ENTER soft key to affirm and log out—or press the ESC soft
key to cancel.
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
Figure 6).
key to scroll to Port 00.
key to display its last-viewed folder.
or key to scroll to the PROPERTIES folder.
or key to select Change Password.
(Enter) key to display the Enter New Password pop-up box.
$872
)
0
(17(5
or key to select Log Out from the PROPERTIES
(Enter) key to display the log out verification pop-up
Using the HIM Chapter 4
57