2. Press the EDIT soft key to display the edit pop-up box for the selected field
(in this case, the port number field).
6WRSSHG
+]
(GLW 6SG 5HI $ 6HO
6HOHFW 3RUW 7R 8VH
=HUR 6SHHG
3RUW 3RZHU)OH[
(6&
3. Use the
whose parameter you want to target for the association (for this example,
Port 00, where the speed Reference parameters for the available drive ports
are located).
TIP
4. Press the ENTER soft key to enter the selected port number.
The target parameter selection pop-up box appears (see example screen
below), showing a list of available target parameters that can be associated.
6WRSSHG
+]
(GLW 6SG 5HI $ 6HO
6HOHFW 3DUDP 7R 8VH
3DU
6SG 5HI $ 6WSW
3DU
3UHVHW 6SHHG
3DU
3UHVHW 6SHHG
(6&
5. Use the
associate.
For this example, we selected drive Parameter 877 - [Port 13 Reference]).
6. Press the ENTER soft key to enter the selected target parameter.
If the target parameter:
• Is not a bit parameter, the parameter association is now changed and
the indirect selector or reference parameter screen re-appears with the
associated parameter information shown.
6WRSSHG
+]
3RUW 'HY 3DUDP
Spd Ref A Sel
3
3RUW
(6&
• Is a bit parameter, a list of available bit numbers is displayed. Use the
or
you want to associate, and press the ENTER soft key. The parameter
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
$872
)
(17(5
or
key to scroll to the port number of the device
The 'Zero Speed' setting may be available to select for specific
applications that require a safe-state speed Reference.
$872
)
(17(5
or
key to scroll to the target parameter you want to
$872
)
3
3RZHU)OH[
3$5
(',7
key to scroll to the bit number of the target parameter
Using the HIM
Chapter 4
53