Changing Displayed Items, Adding A Scale Factor; Or Customizing Text - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Changing Displayed Items, Adding a Scale Factor, or Customizing Text
You can further customize the Process screen by:
• Changing a displayed parameter to a different parameter.
• Applying a scale factor to the displayed parameter.
• Customizing text for the displayed parameter.
To do any or all of the above modifications, follow these steps.
1. With either the multi-line view Process screen
view Process screen
select the drive monitoring item you want to change.
2. Press the EDIT soft key.
For example, suppose you want to change the first drive monitoring item.
In this case, the Process Display 1 Edit screen is shown.
6WRSSHG
 +]
3RUW  3URF 'LVSOD\ 
3DUDP 
6FDOH  
7H[W $PSV
9DOXH
(6& ▼
soft key to select what you want to change (parameter, scale, or
3. Use the
text) for the drive monitoring item.
4. Press the EDIT soft key to display its respective edit pop-up box (see
examples below).
6WRSSHG
$872
 +]
(GLW 3URF 'VS\  3DUDP
7
 
(6& (17(5
5. For parameter or scale editing, use the numeric keys and available soft keys,
and press the ENTER soft key to enter and save the item.
For text editing, use the numeric keys, available soft keys, and the
to enter each character. Then press the ENTER soft key to enter and save
the complete text string.
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
(Figure 8) displayed, use the
$872
)
2XWSXW &XUUHQW
 $PSV
5(6(7 (',7
6WRSSHG
 +]
)
(GLW 3URF 'VS\  6FDOH
1.00
 

(6&
Using the HIM
(Figure 7) or the single-line
or
6WRSSHG
$872
 +]
)
(GLW 3URF 'VS\  7H[W
Amps
 0RYH &XUVRU
(17(5 (6& ,16 '(/
Chapter 4
key to
$872
)
&KDU 6HW
&/5 (17(5
key
37