Initial Him Operation On New Drive Powerup - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Initial HIM Operation on New
Drive Powerup
Using the HIM
This chapter provides information about using the HIM.
Topic
Initial HIM Operation on New Drive Powerup
Selecting Display Contrast
Setting the Date/Time for PowerFlex 750-Series Drives
Creating a User-Defined Drive/Peripheral Name
Customizing the Process Screen
Resetting the Drive/Peripherals
Setting Factory Defaults
Setting Display Flashing for Fault Indication
Setting Display Flashing for Alarm Indication
Viewing/Editing Drive or Peripheral Parameters
Viewing/Clearing Drive Faults or Alarms
Viewing Peripheral Diagnostic Items
Viewing/Clearing Peripheral Events
Checking Drive and Peripheral Firmware Revisions
Using the CopyCat Function
Changing PowerFlex 750-Series Drive Parameter Associations
Linking Parameters in PowerFlex 700/700S Drives
Using a Password
Initiating PowerFlex 750-Series Drive Port Verification
Changing Language for the Display Text
Updating the HIM Firmware or Language
For a list of parameters, see
When powering up a new drive for the first time, the HIM runs through an
initial operating routine that does the following:
• Prompts you to select a language.
• Initiates a drive start-up routine.
• Initiates a port verification check (only for PowerFlex 750-Series drives). If
a port conflict is detected, see
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
Page
31
32
33
35
36
38
38
40
41
42
44
45
46
47
48
52
55
57
60
62
63
Appendix B, HIM Parameters.
page 60 for information to resolve it.
4
Chapter
31