Setting Powerflex 7-Class Drives/Peripherals; To Factory Defaults - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

7. Use the
• Host and Ports (Preferred): Selects the host device and all ports for a
• This Port Only: Selects only this port for a factory default action.
8. Press the
defaults.
Figure 9 - 'Host and Ports (Preferred)' Pop-Up Box
6WRSSHG
$872
 +]
)
:$51,1*
6HWV PRVW SDUDPHWHUV LQ WKH
+RVW GHYLFH DQG DOO SRUWV
WR IDFWRU\ GHIDXOWV
&RQWLQXH"
(6&
(17(5
Press the ENTER soft key to affirm and set most parameters
for the host drive and port devices to factory defaults. In this
case, see the host drive and port device documentation for
the settings that will not be restored—or press the ESC soft
key to cancel.
Setting PowerFlex 7-Class Drives/Peripherals to Factory Defaults
1. Access the Status screen (see
2. Use the
parameters you want to set to factory defaults (for example, Port 00 for the
host drive or the respective port number for one of the drive's connected
peripherals).
3. Press the
4. Use the
5. Use the
6. Press the
7. Press the ENTER soft key to affirm and set all device parameter values to
factory defaults—or press the ESC soft key to cancel.
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
or key to select the appropriate action.
factory default action.
TIP For a description of a selected menu item, press the INFO soft key.
(Enter) key to display the warning pop-up box to reset
or key to scroll to the Port of the device whose
key to display its last-viewed folder.
or key to scroll to the MEMORY folder.
or key to select Set Defaults.
(Enter) key to display the Set Defaults pop-up box.
6WRSSHG
$872
 +]
)
:$51,1*
6HWV DOO SDUDPHWHUV WR
IDFWRU\ GHIDXOWV
&RQWLQXH"
(6&
(17(5
Figure 10 - 'This Port Only' Pop-Up Box
6WRSSHG
$872
 +]
:$51,1*
8VH 0267 WR UHVHW W\SLFDO
VHWWLQJV RQ WKLV SRUW
SUHIHUUHG  8VH $// WR
UHVHW DOO VHWWLQJV
(6& $// 0267
Press the MOST soft key to set most settings for the selected port
device to factory defaults. In this case, see the host drive
documentation for the settings that will not be restored. Press
the ALL soft key to set all settings for the selected port device to
factory defaults—or press the ESC soft key to cancel.
Figure 6).
Using the HIM Chapter 4
)
▲
▼
39