Resetting The Drive/Peripherals; Setting Factory Defaults; Setting Powerflex 750-Series Drives/Peripherals; To Factory Defaults - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Human interface module
Hide thumbs Also See for PowerFlex 20-HIM-A6:
Table of Contents

Advertisement

Chapter 4
Using the HIM
Resetting the Drive/
Peripherals

Setting Factory Defaults

38
The drive or any of its connected peripherals can be reset by removing and
restoring power to the drive (power cycling). If this is not convenient or cannot
be done because of application circumstances, the HIM can be used to reset the
drive/peripherals. Follow these steps to reset the drive or any of its peripherals.
1. Access the Status screen (see
2. Use the
reset (for example, Port 00 for the host drive).
3. Press the
4. Use the
5. Use the
6. Press the
reset the device.
7. Press the ENTER soft key to affirm and reset the device, or press the ESC
soft key to cancel.
The procedure to set a PowerFlex 750-Series drive and its connected peripherals
to factory defaults is slightly different than the procedure used for a PowerFlex 7-
Class drive and its peripherals. See the respective subsection for instructions.
Setting PowerFlex 750-Series Drives/Peripherals to Factory Defaults
1. Access the Status screen (see
2. Use the
parameters you want to set to factory defaults (for example, Port 00 for the
host drive or the respective port number for one of the drive's connected
peripherals).
3. Press the
4. Use the
5. Use the
6. Press the
examples below).
6WRSSHG
 +]
3RUW  6HW 'HIDXOWV
+RVW DQG 3RUWV 3UHIHUUHG
7KLV 3RUW 2QO\
(6&
For Host Drive
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
Figure
6).
or
key to scroll to the Port of the device you want to
key to display its last-viewed folder.
or
key to scroll to the DIAGNOSTIC folder.
or
key to select Reset Device.
(Enter) key to display a pop-up box asking if you want to
Figure
6).
or
key to scroll to the Port of the device whose
key to display its last-viewed folder.
or
key to scroll to the MEMORY folder.
or
key to select Set Defaults.
(Enter) key to display the Set Defaults pop-up box (see
$872
)
3RUW [[ 6HW 'HIDXOWV
,1)2
6WRSSHG
$872
 +]
)
7KLV 3RUW 2QO\
(6&
,1)2
For Connected Peripheral

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerflex 20-him-c6s

Table of Contents