Chapter 4
Using the HIM
Selecting Display Contrast
32
The contrast of the HIM display can be adjusted for optimal viewing. Follow
these steps to change the contrast.
1. Access the Status screen, which is displayed on HIM power up.
Figure 6 - Status Screen
6WRSSHG
+]
Host Drive
240V
20G...D014
00
(6&
5()
2. Use the
connected.
Port
Location
01
HIM cradle on the front of the drive.
02
DPI port near the bottom of the drive control pod (PowerFlex 750-Series drives) or
at the bottom of the drive (PowerFlex 7-Class drives).
03
Splitter cable port when the cable is plugged into the DPI port near the bottom of the drive control
pod (PowerFlex 750-Series drives) or at the bottom of the drive (PowerFlex 7-Class drives).
3. Press the
4. Use the
5. Use the
6. Press the
box.
7. Use the
or
8. Press the ESC soft key to set the contrast and exit the screen.
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
$872
)
4.2A
3$5
7(;7
or
key to scroll to the port to which the HIM is
key to display its last-viewed folder.
or
key to scroll to the PROPERTIES folder.
or
key to select Adjust Contrast.
(Enter) key to display the Set LCD Contrast edit pop-up
soft key to adjust contrast to the desired setting.