Viewing/Clearing Drive Faults Or Alarms - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Chapter 4 Using the HIM
Viewing/Clearing Drive
Faults or Alarms
44
Follow these steps to view/clear drive faults or alarms.
1. Access the Status screen (see
2. If Port 00 (host drive) is not shown above the ESC soft key, use the
or
3. Press the
4. Use the
5. Use the
6. Press the
)DXOWHG
 +]
3RUW 
  3RUW  '3, /RVV
  'ULYH 3RZHUXS
 7UQVLVWU 2YU7HPS
  +HDWVLQN 2YU7HPS
(6& 723 (1'
Faults/alarms are listed from the most recent to occur (line 01) to the least
recent. The fault/alarm number and name are shown at the right.
7. Use the
the fault/alarm queue.
Soft Key Function
ENTER Displays the Time Stamp pop-up box for the fault/alarm. Note that the real-time clock in a
PowerFlex 750-Series drive must be accurately set to provide meaningful time stamp data. For
details, see
Use the
(if supported by device).
TOP Displays the first (most recent) fault/alarm in the queue.
END Displays the last (least recent) fault/alarm in the queue.
8. To clear faults/alarms, press the CLR soft key.
In the Select Action pop-up box, select the appropriate action using the
or
fault/alarm or clear the fault/alarm queue. To cancel the pop-up box, press
the ESC soft key or select Cancel from the list and press the
key.
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
Figure 6).
key to scroll to Port 00.
key to display its last-viewed folder.
or key to scroll to the DIAGNOSTIC folder.
or key to select Faults or Alarms.
(Enter) key to display the numbered fault/alarm queue.
$872
)
)DXOWV
&/5 (17(5
key or the following soft keys to navigate within
or
Setting the Date/Time for PowerFlex 750-Series Drives on page
or key to scroll to all parameters related to the displayed fault/alarm
key and press the
33.
(Enter) key to clear the active
(Enter)