Changing Password-Protected Drive/Peripheral Parameters - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Chapter 4 Using the HIM
58

Changing Password-protected Drive/Peripheral Parameters

When the host drive is password protected, parameter settings for the drive and
its connected peripherals can be viewed—but not changed until after the correct
password value is entered.
When attempting to edit a parameter value while logged out, the HIM will
prompt you for the password before allowing access.
Password protection also applies to:
• Drive start-up procedure
• Factory defaults
• User sets
• CopyCat function
Follow these steps to edit password-protected parameters.
1. Access the Status screen (see
2. If Port 00 (host drive) is not shown above the ESC soft key, use the
or
3. Press the
4. Use the
5. Use the
6. Press the
6WRSSHG
 +]
(QWHU 3DVVZRUG
 
(6&
7. Use the numeric keys to enter the existing password value.
soft key to delete an erroneous entry.
Use the
8. Press the ENTER soft key to enter the existing password.
Thereafter, any parameter setting can be changed.
Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
Figure 6).
key to scroll to Port 00.
key to display its last-viewed folder.
or key to scroll to the PROPERTIES folder.
or key to select Log In.
(Enter) key to display the Enter Password pop-up box.
$872
)
0
(17(5