Saving Settings Data To Controller Memory; When Using Scene Group 0; When Using Scene Groups 1 To 31 - Omron FZ4 Series User Manual

Saving Settings Data to Controller Memory

Saves system data and scene group data on the controller's flash memory. Make sure to save settings
data when settings have been changed.
Important
If "Save to file" is performed for system + scene group 0 data, the data being saved will also be saved to the
●
controller flash memory at the same time. Do not turn off the power during processing. The controller may not
start up properly the next time it is turned on.
During data transfer to USB memory, do not remove the USB memory device until transfer is completed. Data
●
and/or the USB memory may corrupt.
Note
5
When using scene groups 1 to 31, only system data can be saved in the controller flash memory. Note,
●
however, that if a USB memory device is plugged in, scene group data can be saved to the USB memory. (For
FZ4-11

When Using Scene Group 0

1.
On the Main screen, tap [Data save] in the toolbar.
A confirmation message is displayed.
Note
The same operation is available by tapping [Data] menu - [Data save].
●
2.
Tap [Yes].
System data and scene group data are saved on the controller's flash memory.

When Using Scene Groups 1 to 31

1.
Plug a USB memory device into the controller.
2.
On the Main screen, tap [Data save] in the toolbar.
A confirmation message is displayed.
3.
Tap [Yes].
System data is saved to the controller's flash memory and scene group data is saved to the USB
memory, respectively.
The data from scene groups 1 to 31 is saved to the USBDisk. (For FZ4-11
data are saved in the controller.)
When multiple USB memories are connected to the controller, check in the file explorer window,
332 Saving Settings Data to Controller Memory
/H11 , all data are saved in the controller.)
/H11 , all
FZ4 User's Manual