Table of Contents
Advertisement
Processing Item Selection Guidelines
Processing items for performing measurement are provided with this product. Application-oriented
measurement can be configured by combining processing items or changing the settings of processing
items.
The method for searching for processing items appropriate to the target measurement is shown here.
Reference:
Selecting Measurement Processing Items Using a Chart (p.49)
●
Reference:
Selecting Measurement Processing Items According to the Measurement Method
●
and Purpose (p.56)
Selecting Measurement Processing Items Using a Chart
Select processing items appropriate to the target using the chart.
Item
Performing position
compensation for objects
Measuring the position of objects
Inspecting the status of objects
Inspecting for defective products
FZ4 User's Manual
Reference:
Position Compensation (p.50)
Reference:
Locating (Measurement Objects Not Inclined) (p.51)
Reference:
Locating (Measurement Objects Inclined) (p.52)
Reference:
Internal and External Inspection (p.52)
Reference:
Presence Inspection (p.53)
Reference:
Dimension Inspection/Measurement (p.53)
Reference:
Text Comparison/Inspection (p.54)
Reference:
Quantity Inspection/Measurement (p.55)
Reference:
Defect/Contamination Inspection (p.55)
Reference:
Burr Inspection (p.54)
Reference:
Inspection for Presence of Different Objects (p.56)
References
Processing Item Selection Guidelines
2
49
Advertisement
Table of Contents
