Omron FZ4 Series User Manual page 489

(Example)
The following sample command returns user group ID, "UG1," in the user account used by the user
currently logging in.
<Command>
<Response>
MEASURE or M
Executing measurement
Executes measurement one time.
<Command format>
<Response format>
When processing is performed normally
Normal
When processing is not performed normally
Note
About "Normal (Fxxx series method)"
●
Reference: Setting the Start-up Status [Startup Setting] (p.347)
<Parameters explanation>
When "Data Output" is set in the flow, the measurement results are output.
Measurement
When "Data Output" is not set, the measurement results are not output.
result
Reference:
Starts continuous measurement
Starts continuous measurement.
FZ4 User's Manual
Output Format (Non-procedure) (p.519)
Controlling/Outputting through Serial Communication (Non-procedure)
Normal (Fxxx series)
7
487