Changing Nettime Options; Configuring Secretary's Pc For Use In Other Vlan As Dicentis Server - Bosch DICENTIS Software Manual

DICENTIS
SQL authentication example to default instance
This example shows how to use SQL authentication to connect the default SQL server on
machine SQLSRV. The example is the same as the previous version, except that the
connection is to the default SQL server instant of a defined instance
The user name and password to use are respectively: DcnmUser and P@ssw0rd. The database
to use is ConfHallE53. The changes to the configuration will be (the changed elements are
underlined):
Note: In this situation, the term Integrated Security=True is removed.
Database creation:
Remote:
On target:
12.3

Changing NetTime options

NetTime is used to synchronize timers used in the DICENTIS Conference System. If the
DICENTIS Conference System is used in a corporate environment, you might have to change
the NetTime options.
To change these options:
1.
2.
3.
4.
NOTE: Remember to change the service Windows Time to Automatic after uninstalling
NetTime.
12.4 Configuring secretary's PC for use in other VLAN as DICENTIS
server
Background information
The secretary (or clerk) should use the Meeting Application on his/her PC to prepare
meetings. If the secretary's PC is in a different VLAN than the DICENTIS server, the Meeting
Application cannot find the DICENTIS server. This is because the DICENTIS devices and the
Meeting Application use the DNS-SD protocol, which does not work between different VLANs.
If necessary, the technician should use the following procedure to configure the Meeting
Application on the secretary's PC so that it can communicate with the DICENTIS server.
Procedure
At the secretary's PC:
1.
Bosch Security Systems B.V.
Right click the NetworkTime icon in the notify area, and select Properties -> Settings...
Enter the correct Hostname or IP Address of the Time server in your environment.
Normally the time server is the same server as the DHCP server. Consult your local IT
department for more information.
Click OK.
Click stop, and then click start to activate the new settings.
Ping the DICENTIS server:
Software Manual
Hints and Tips | en 87
2017.02 | V1.9 |