DICENTIS
6.4.6
Camera Settings
The camera settings page enables a technician to quickly and easily configure/update the
camera settings.
–
–
–
–
Camera settings are only available if software license DCNM-LCC is installed.
Prior to a meeting a technician can configure the camera:
1.
2.
3.
4.
During a meeting:
1.
2.
Camera Settings
–
The following video options are supported:
–
–
–
Bosch Security Systems B.V.
The Status column indicates whether a camera is connected (by means of a red cross or a
blue check mark), enabling the technician to carry out any corrections. Cameras that are
no longer used are marked by a red cross and can be easily deleted, using the minus (-)
symbol.
The camera name can be changed to a logical name, making it easy to find.
The camera website can be quickly accessed by clicking a hyperlink.
The camera type is automatically detected and displayed.
Add the camera to the list of cameras.
Configure to which SDI input it is connected in the XML configuration file, see
Configuration Procedure, page 74. The SDI makes it possible to dynamically switch
HD‑SDI video signals on the MMD or in the Meeting Application.
If required, configure the H.264 video stream of the camera. This can be an external
H.264 encoder if necessary.
Configure the camera presets (Prepositions), allowing the technician to:
–
Call up presets
–
Pan, tilt, zoom the camera
–
Focus near, focus far
–
Store presets
The system controls the camera via the stored presets.
The operator can control the camera via the PTZ-control (Pan, Tilt, Zoom) in the Meeting
Application and modify presets and store them. The PTZ-control is called up by clicking
the ... at the bottom right of the Meeting Application screen.
Overview: Defines the camera used as the overview camera.
Bosch Onvif (compliant) cameras.
Panasonic SDI/IP cameras which support HD Integrated Camera Interface Specifications
version 1.06. The H.264 stream of the Panasonic cameras is not supported. An external
H.264 encoder is required if the H.264 stream needs to be displayed on the multimedia
devices. If the video stream only needs to be displayed on the Meeting Application, the
H.264 stream of the Panasonic camera can be used (e.g. rtsp://<ipaddress>/mediainput/
h264/stream_2).
Sony SDI/IP cameras which support CGI Commands according to Sony standards
(RCTG001, RTSP streaming function supported by Sony). The second H.264 stream of the
Sony camera can be used to display on the multimedia devices and the Meeting
Application. It is also possible to use an external encoder to encode the SDI stream for
display on the multimedia devices and Meeting Application.
Note: The Sony camera needs to be placed in a separate VLAN to avoid problems with the
multicast data.
Please configure the H.264 correctly so it will be displayed properly:
Software Manual
Meeting application | en
59
2017.02 | V1.9 |