Bosch DICENTIS Software Manual page 43

DICENTIS
Configure system for use with NFC tags
Notice!
NFC tags can only be used with DCNM-MMD2 , DCNM-DE , DCNM-DSL , and DCNM-DVT
devices.
If NFC tags are used to identify/authenticate participants, the secretary or clerk should create
a unique NFC ID for each participant. To do this:
1.
2.
3.
Bosch Security Systems B.V.
In the Persons (middle) pane, click on the name that you want to assign the NFC tag to.
In the right-pane, click in the NFC Id field to select it.
Identify the NFC Id to the system:
– Make sure a suitable NFC-USB card reader is connected to the USB port of the Client
(secretary's) PC. Bosch Security Systems B.V. recommends using one of the
following Smart Card Readers: HID Omnikey 5022 CL, HID Omnikey 5421, Identiv
SCM PC-Card uTrust 470x F, or Sony USB NFC Reader RC-S380/S.
– Scan the NFC tag at the USB card reader. The NFC Id will appear in the NFC Id field.
– If you do not have a USB card reader, you can type the NFC Id in the NFC Id field
instead.
– If the same NFC card/ID is used for more than one participant, a red border is shown
around the NFC Id field, indicating that there is a validation error.
Software Manual
Meeting application | en 43
2017.02 | V1.9 |