Bosch DICENTIS Software Manual page 14

14 en | System Overview
8.
9.
Figure 3.2: Typical camera setup
A typical camera setup in a DICENTIS Conference System consists of:
1. H.264 encoder to encode the HD SDI video to H.264
2. HD-SDI switcher
3. Projector
4. Video camera (Bosch Onvif, Sony, Panasonic)
5. System server controller (PC)
6. L3 Ethernet switch
7. Audio Powering Switch (DCNM-APS / DCNM-APS2)
8. DCNM-MMD
Cables:
2017.02 | V1.9 |
– Ethernet switch with PoE on some ports.
- Routes the system data via Ethernet.
- Provides power to the DICENTIS devices via PoE.
CAT‑5e Ethernet cable (minimum requirement).
Optional video camera (Bosch Onvif Profile-S, Sony IP cameras via CGI commands, or
Panasonic HD Integrated IP) + external power supply:
– Captures the image of a speaking participant.
Note: The Sony camera needs to be placed in a separate VLAN to avoid problems with the
multicast data.
Note: The Panasonic camera requires an external H.264 encoder if the SDI video needs to
be displayed on the multimedia devices (or in the Meeting Application).
Software Manual
DICENTIS
Bosch Security Systems B.V.