Bosch DICENTIS Software Manual page 45

DICENTIS
–
–
–
–
Bosch Security Systems B.V.
– Show waiting in queue by green mic LED: When selected, the LED in the
microphone will be on for devices in the waiting list (instead of off when not
selected). For the first device or participant in the waiting list, the LED could be
blinking instead of steady depending on whether the Show first in queue by blinking
green mic LED setting is selected or not. All other devices in the waiting list will have
the LED on steady.
– Show first in queue by blinking green mic LED: When selected, the LED on top of
the device's microphone that is the first in the waiting list will blink green instead of
being steady green (on). Can only be used when Show waiting in queue by green
mic LED is also selected.
– Note: this does not influence the behavior of the button bar LEDs.
Speech timer:
– Speech time per speaking turn: When selected, the speech timer can be set per
speaking turn in minutes and seconds. Each time a speaker is allowed to speak, this
time is awarded.
– Show last minute by red blinking mic button: When selected, the microphone
button on the active speaker's device will start blinking when the last minute of
speech time has been reached.
– Show last minute by red blinking mic LED: When selected, the microphone LED on
the active speaker's device will start blinking when the last minute of speech time
has been reached.
– Adjust speech time: When selected, the speech time can be increased or decreased
with the number of minutes and seconds entered by clicking the + / - icons at the top
of the Discussion profiles screen.
– Turn microphone off when time has elapsed: When selected, the microphone is
switched off after the set speech time has elapsed. When not selected, the
microphone will stay open after the set speech time has elapsed.
Priority options:
– Priority tone: When selected, a priority tone is audible when priority is used. Set to
off by default. The priority tone can be configured per agenda item or during the
discussion, but can only be used if a priority tone was defined.
– Mute all speakers: When selected, it mutes all speakers temporarily when priority is
used. Disabled when Open (automatic) is chosen.
– Switch off microphones and clear queue: When selected, all speakers and persons
in the waiting list are cancelled when the priority is used.
Camera control options (only available with DCNM-LCC license):
– Camera control: When selected, activates external or SDI video switchers, as
required; directs the cameras towards the required pre-configured positions;
displays the camera image on the multimedia devices.
– Camera override: When selected, the last participant that activated their
microphone is shown.
Multimedia device and meeting application options:
The available options depend on the installed licenses and the settings in the Discussion
profile.
With DCNM-LPD license only:
– Display image of speaker: When selected, the image of the first speaker during the
meeting, as stored in the Participant details, is shown along with his/her participant
details
Software Manual
Meeting application | en 45
2017.02 | V1.9 |