Program Mode Programming; Default Programming - Sam4s ER-180T Series Operator's And Programming Manual

Program Mode Programming

Default Programming

All departments are nontaxable and open, without entry limits by default status programming
of "00000000".
All system options are set to 0 in default programming, unless otherwise noted. Change only
the options that will deviate from default programming. There is no need to re-enter an option
status of 0, since 0 is its original setting.
All programming (unless otherwise noted) is done with the control lock in the P position.
Each section details a specific area of register programming.
SAM4s ER-180T Operator's & Programming Manual v1.4
Program Mode Programming  49