Panasonic KX-NS500 Installation Manual page 250

5.7.6 ECO mode (KX-NT500 series only)
For details about operating the PROGRAM button and other buttons, refer to "For IP-PTs" in
"5.7.1 Assigning IP Addressing Information".
To exit from ECO mode, turn off the KX-NT500 series IP-PT, and then follow the procedure below.
KX-NT553/KX-NT556
To start programming
Supply power
to the IP-PT.
To end programming
Return to the
Menu screen.
KX-NT511/KX-NT551
To start programming To start programming
Supply power
to the IP-PT
To end programming To end programming
Press HOLD to return to
the Menu screen.
Note
•
For KX-NT511 Users
For details about operating the PROGRAM button and other buttons, refer to "For IP-PTs" in
"5.7.1 Assigning IP Addressing Information".
250 Installation Manual
SETUP
Press "SETUP"
when it is displayed.
STORE
Press "STORE".
Press PROGRAM while
Select "ECO Mode".
"Searching" is displayed.
Press "STORE".
Select "ECO Mode".
The IP-PT will reboot in
normal mode.
Press SP-PHONE.
The IP-PT will reboot in
normal mode.
ENTER Select "Off".
Select "Off".