Panasonic KX-NS500 Installation Manual page 238

5.7.3 Setting LLDP Parameters
KX-NT511/KX-NT551
After assigning
the IP addresses
Select "Enable"
for LLDP setting.
To set the VLAN ID for the primary port
Select "LLDP (Primary)".
VLAN Priority
0–7
To set the VLAN ID for the secondary port
Select "LLDP (Secondary)".
Select "Priority".
To set the Interval time for LLDP
Select "LLDP (Secondary)".
Press SP-PHONE.
To end programming
Press HOLD three
times to return to the
Menu screen.
Note
•
For KX-NT511 Users
238 Installation Manual
Select "QoS". Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE. Select "VLAN ID".
*1*2
Press SP-PHONE.
*1*2
VLAN Priority
0–7
Press SP-PHONE.
Press STORE.
Select "LLDP".
VLAN ID
0–4094
VLAN ID
Select "VLAN ID".
Press SP-PHONE.
Press SP-PHONE.
Select "LLDP (Interval)".
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE.
*1
Select "Priority".
*1
0–4094
Press SP-PHONE.
INTERVAL
1–3600