Panasonic KX-NS500 Installation Manual page 219

Continued from previous page
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255")
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
Note
•
For KX-NT511 Users
For details about operating the PROGRAM button and other buttons, refer to "For IP-PTs" in
"5.7.1 Assigning IP Addressing Information".
•
To confirm the connection to the secondary PBX after assigning IP addressing information, (1) turn
the IP-PT's power off, and (2) hold the STORE button and 2 key while turning the power on.
The IP-PT will reboot
and can then be
registered to the PBX.
5.7.1 Assigning IP Addressing Information
Installation Manual 219