Panasonic KX-NS500 Installation Manual page 189

3.
"Continue Offline Programming (Open - Offline Mode)
*1 The PBX's system data file
•
KX-TDA100/KX-TDA200: DSYS
•
KX-TEx824: xxxxxx.kea
The software version for KX-TDA100/KX-TDA200 and KX-TEx824 series PBXs must meet the latest version requirements shown in
*2
the Data Converter tool. If the requirements are not met, you must use the Maintenance Console to upgrade the version to the latest
version, and then save the DSYS or xxxx.kea file.
Notice
•
The following numbering plan settings are brought over during data conversion:
Feature Numbers, Other PBX Number, Extension Number, Quick Dial Number
•
PBX voice data (e.g., ESVM, SVM, OGM) is not converted.
•
Data conversion for a SLC/LCOT card in the KX-NS500 is not supported; the number of ports in these
cards is too small.
•
In the case of KX-TDA100/KX-TDA200, data that is not supported by the data conversion is shown in
the following table.
Unsupported Item
Time Mode
Current time mode
Time mode switching time (manual mode)
Wired/Wireless extensions
Timed Reminder
Station Lock
Remote Station Lock
Extension Call Charge Total
Not Ready/Ready (Wrap-up)
LCS On/Off
Room Status (Check In/Check out/Not Ready/
Cleaned Up)
Auto Answer
Absent Message Status
Saved Number Redial
ICD Group Login Status (Login/Logout)
Message Waiting
Incoming Log
Outgoing Log
TAM Log
Personal Absent Message
5.3 Starting Web Maintenance Console
Default Setting
Location setting default
Not Stored
Not set
Unlocked
Unlocked
Total cleared
Wrap-up status cleared
Location setting default
Location setting default
Location setting default
Not set
Number cleared
Location setting default
Cancelled
Cleared
Cleared
Cleared
Message cleared
Installation Manual 189