Panasonic KX-NS500 Installation Manual page 214

5.7.1 Assigning IP Addressing Information
KX-NT321/KX-NT511/KX-NT551
To start programming
Supply power to the IP-PT.
To enter the IP address of the PBX
Select "PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (if required)
Select "Secondary
PBX".
Press HOLD twice to return
to the Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
Note
•
For KX-NT511 Users
For details about operating the PROGRAM button and other buttons, refer to "For IP-PTs" in
"5.7.1 Assigning IP Addressing Information".
•
To confirm the connection to the secondary PBX after assigning IP addressing information, (1) turn
the IP-PT's power off, and (2) hold the STORE button and 2 key while turning the power on.
214 Installation Manual
Press PROGRAM
while "Searching" is displayed.
Select "PBX IP
Press SP-PHONE.
Address".
PBX IP Address
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE.
Select "Primary
PBX".
Press SP-PHONE.
PBX IP Address
Press SP-PHONE.