Panasonic KX-NS500 Installation Manual page 241

KX-NT321/KX-NT511/KX-NT551
To start programming
Press PROGRAM while
"Searching" is displayed.
To set the DS field value for the primary port
Select "Primary Port".
Diffserv
0.0–7.7
To set the DS field value for the secondary port (only for KX-NT300 series)
Press HOLD to return to
the Diffserv setting screen.
Press SP-PHONE.
To end programming
Press HOLD until the
Menu screen is displayed.
Note
For KX-NT511 Users
For details about operating the PROGRAM button and other buttons, refer to "For IP-PTs" in
"5.7.1 Assigning IP Addressing Information".
Select "QoS".
Press SP-PHONE.
Press SP-PHONE. Select "DS (Enable)".
Press SP-PHONE.
Select "Secondary Port". Press SP-PHONE.
Diffserv
0.0–7.7 Press SP-PHONE.
Press STORE.
Select "Diffserv".
Press SP-PHONE.
Select "DS (Enable)".
The IP-PT will reboot
and can then be
registered to the PBX.
5.7.4 Setting Diffserv Parameters
Press SP-PHONE.
Installation Manual 241