Troubleshooting - Emerson Rosemount 708 Quick Start Manual

June 2016
Note
™
SteamLogic
CD for more information.

6.4 Troubleshooting

If the device is not joined to the network after power up, verify the correct
configuration of the network ID and join key, and that active advertising has been
enabled on the Smart Wireless Gateway. The network ID and join key in the
device must match the network ID and join key of the Gateway.
The network ID and join key may be obtained from the Gateway on the
Setup>Network>Settings page of the web server (see
network ID and join key may be changed in the wireless device by following the
Fast Key sequence shown below.
Table 3. Changing Network ID and Join Key Fast Key Sequence
Function
Join Device to Network
Figure 13. Smart Wireless Gateway Network Settings
software is provided for viewing steam trap status. Refer to the manual on the
Fast Key sequence
2, 1, 2
Figure 13 on page
Menu items
Network ID, Set Join Key
Quick Start Guide
11). The
11