Toyota Camry Hybrid AHV40 Manual page 423

Table of Contents

Advertisement

BE-162
JFUNCTION
1. General
This sliding roof system has the following functions:
Function
Manual
open-and-close
One touch auto
open-and-close
Manual tilt
up-and-down
One touch auto
tilt up-and-down
Jam protection
Key-off
operation
Sliding roof open
warning (See
Page BE-164)
BODY ELECTRICAL - SLIDING ROOF SYSTEM
This function causes the sliding roof to open (or close) while the SLIDE OPEN
switch (or SLIDE CLOSE switch) is pressed. The sliding roof stops as soon as the
switch is released.
This function enables the sliding roof to be fully opened at 0.3 sec. or long press
of the SLIDE OPEN switch (or SLIDE CLOSE switch).
This function causes the sliding roof to tilt up (or tilt down) while the TILT UP
switch (or TILT DOWN switch) is pressed. The sliding roof stops as soon as the
switch is released.
This function enables the sliding roof to be fully tilt up at 0.3 sec. or long press of
the TILT UP switch (or TILT DOWN switch).
The jam protection function automatically stops the sliding roof and moves it open
half way (or fully tilt up) if a foreign object gets jammed in the sliding roof during
close or tilt down operation.
The key-off operation function makes it possible to operate the sliding roof for
approximately 43 seconds after the ignition switch or power source mode is turned
to the ACC or OFF position, if the front doors are not opened.
When the power switch is turned from IG-ON to OFF and the driver door is opened
with the sliding roof open, the buzzer in the combination meter sounds once. Then,
a warning message appears on the multi-information display for 8 seconds.
Outline

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents