Toyota Camry Hybrid AHV40 Manual page 288

4. Multi-information Display
General
The multi-information display has five modes:
Mode
Cruise Information
(See page BE-29)
Energy Monitor Display
(See page TH-55)
Eco Drive Level Display
(See page BE-30)
Warning
(See page BE-31)
Diagnosis
(See page CH-70)
BODY ELECTRICAL - METER
D Five types of information can be displayed: outside temperature,
driving range, average fuel consumption since refueling,
distance driven since THS II start, and average speed since THS
II start.
D The display can be changed by using the DISP switch.
D Indicates the energy transmission direction for checking the
current drive method (engine, motor or both), the power
generation status of the engine and the status of regenerative
energy use.
D The SOC (state of charge) of the battery can be checked on the
meter using an 8-stage display, which is provided in the battery
illustration.
D The display can be changed by using the DISP switch.
D The average fuel consumption conditions since THS II start are
indicated in 4 levels.
D The display can be changed by using the DISP switch.
Interrupts the multi-information display immediately when a
warning occurs.
DTC (Diagnostic Trouble Code) for the brake control system can
be displayed.
Outline
BE-27